800 High Temp U-Seals
Style 800 U-seals are molded from tough, abrasion-resistant polyurethane. The four lobed expander ring energizes the sealing lips, even at zero pressure, to help prevent 'weeping' when the system is idle.
| SEAL INFORMATION | |
|---|---|
| MATERIAL | 95A URETHANE |
| TEMPERATURE RANGE | -40° to +225° F |
| PRESSURE RANGE | 0 to 5,000 PSI |
| SPEED | 3 FT/SEC |
| PART NUMBER | (Prefix)(CS) - (Inside Dia) - (Height) |
| Standard - Height and cross section are equal, thus giving a square seal. Utilizes type 'D' lip. Typical Part Number U25-2.50 | |
| Deep - Utilizes the same 'D' lip, but the seal height is greater than the cross section, thus giving a rectangular shape. Typical Part Number U25-2.50-37D | |
| Type SQB - Same dimensions as the Standard seal. Beveled lip design provides better film breaking. Utilizes type 'B' lip. Typical Part Number U25-2.50-SQB | |
| Type B - Same dimensions as the Deep seal. Beveled lip design provides better film breaking. Utilizes type 'B' lip. Typical Part Number U25-2.50-37B | |
